Before starting, make sure that the mobile is turned off.
Step 2 Back cover
Starting from the small notch in the upper right corner, disassemble the back cover.
Step 3
Once the top part is released, the rest of the lid will come out easily.
Step 4 Battery
Remove the battery by pulling on the bottom.
Step 5 SIM and microSD cards
Remove the SIM and micro SD cards.
Step 6 Intermediate housing
Remove the 10 Phillips screws that hold the middle housing.
Note that one of the screws is covered by a white sticker.
Step 7
Use a flat plastic tool to disassemble the intermediate housing.
Step 8
Separate the intermediate housing.
Step 9 Rear camera
Remove the yellow sticker that covers the connectors.
Step 10
Unplug the camera from the motherboard and remove it by pulling gently.
Step 11 Front camera
Unplug the flex from the front camera, by pulling on the tab of the connector and pulling gently.
Step 12
Pull gently on the camera to detach it.
Step 13 Motherboard
Unplug and detach the touch screen data flex on the motherboard.
Step 14
Disconnect the data flex from the LCD display, by pulling the connector tab and gently pulling the cable.
Step 15
Disconnect, in the same way, the interconnection flex with the auxiliary auxiliary plate.
Step 16
Remove the Phillips screw that holds the motherboard.
Step 17
Separate the base plate from the chassis.
Step 18
Finally, disconnect the coaxial antenna cable.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.