To begin with we must unhook the back cover.

We remove the battery.

Remove the 9 Phillips screws (PH # 00) that hold the intermediate housing and we can unhook it.

We take off and desoldamos the vibrator.

We disconnect the coaxial cable, the flex display and we can take off the auxiliary plate.

We remove the back camera, the flex with side buttons, we disconnect the flex from the digitizer and the flex from the display.

We extract the Phillips screw (PH # 00) that holds the motherboard and remove it.

Apply heat to the screen and take off all the edges of the digitizer, to remove it you have to remove the plastic cover from the back.

We take off the display that we are going to replace.