Wiko Highway Signs - Motherboard

Guide with all the necessary steps for you to change the Wiko Highway Signs motherboard yourself.

Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesWikoWiko Highway SignsMotherboard

For this tutorial you will need the following spared parts and tools

Special SAT 0.75mm high friction PVC pick
1,07 €
Smartphones and PC repair tool case
35,92 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Wiko Highway Signs

Specifications

Screen: 4.7 "Resolution 1280x720 capacitive touch HDT, IPS
Dual SIM: Yes
Processor: Octacore-Core 1.4Ghz, Cortex A7
Frontal camera: 5MPx
Main camera: 8MPx
RAM: 1GB
GPS: Yes
Internal memory: 8GB
Sist. operative: ANDROID 4.4 KitKat
Expandable memory: Micro SD up to 32GB
Wifi: Yes
Weight: 124g (with battery)
Bluetooth: stereo 4.0
Size: 138x68x7,7

Before starting, make sure that the mobile is turned off.

Step 2

The back cover is glued on all sides with double-sided adhesive.

Remove it by inserting a pick underneath and tracing the contour.

Step 3 Intermediate housing

Remove the 11 Phillips screws that secure the middle housing.

Step 4

Disassemble the intermediate housing using the tine again.

Step 5 Cameras

Unplug and remove the front and rear cameras from the motherboard.

Step 6 Motherboard connections

Unplug and detach the flex from the touch screen.

Step 7

Disconnect the lower flex and the battery connector on the motherboard.

Step 8

Remove the pad that covers the display connector on the motherboard.

Unplug it by pressing the tab and pulling gently.

Step 9 Motherboard

Finally, remove the base plate, fastened by 1 Phillips screw.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: