We will start by removing the back cover. For this we will use an opening tool, which we will move along the contour of the phone to release the notches that hold it.

To remove this case, we first remove the thirteen Phillips screws (PH # 00) that attach it to the chassis. Once the screws are removed, we will use a flat tool to release it.

In this step, we will disconnect the components connected to the motherboard to be able to remove it later.

We disconnected the battery, the flex of side buttons, the flex connection with the auxiliary plate and the flex of the display.

The last thing we have left to disconnect now, is the flex of the digitizer.

In order to remove the motherboard, we will remove the Phillips screw (PH # 00) that holds it.

To finish, we will disengage the base plate of the chassis, since the camera is connected to the other side of this .. To remove it, we simply have to disconnect it.