Wiko Fever 4G - Front camera

Guide with all the necessary steps to change the Wiko Fever 4G front camera yourself.

Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesWikoWiko Fever 4GFront camera

For this tutorial you will need the following spared parts and tools

Opening tool Smartphone, tablet
2,19 €
Anti-static tweezer tips VETUS ESD-249
4,74 €
Terminal opening tool, plastic
0,71 €
Smartphones and PC repair tool case
35,92 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Wiko Fever 4G

Characteristics:
Dimensions: 73.8 x 148 x 8.3 mm.
Weight: 143 g.
SoC: MediaTek MT6753.
Processor: ARM Cortex-A53, 1300 MHz, Number of cores: 8.
Graphic processor: ARM Mali-T720 MP3, 700 MHz, Number of cores: 3.
RAM memory: 3 GB, 800 MHz.
Internal memory: 16 GB.
Memory cards: microSD, microSDHC, microSDXC.
Display: 5.2 in, IPS, 1080 x 1920 pixels, 24 bit.
Battery: 2900 mAh, Li-Polymer (polymer lithium ion).
Operating system: Android 5.1 Lollipop.
Camera: 4128 x 3096 pixels, 1920 x 1080 pixels, 30 fps.
SIM card: Micro-SIM.
Wi-Fi: b, g, n, Wi-R Hotspot.
USB: 2.0, Micro USB.
Bluetooth: 4.0.
Location / Navigation: GPS, A-GPS.

We will start by removing the back cover. For this we will use an opening tool, which we will move along the contour of the phone to release the notches that hold it.

Step 2 The inner casing

To remove this case, we first remove the thirteen Phillips screws (PH # 00) that attach it to the chassis. Once the screws are removed, we will use a flat tool to release it.

Step 3 Front camera

To finish, we will disconnect the front camera from the motherboard and disengage it from the chassis.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: