Before starting, make sure that the mobile is turned off.

Remove the back cover with the opening tool, this will avoid scratching the equipment.

Remove the battery by pulling on the bottom.

Remove the SIM and SD cards.

Remove the 10 Phillips screws from the intermediate housing.

Separate the intermediate housing with the opening tool.

Disconnect the rear camera from the motherboard by pressing the tab on the connector.

Finally, gently pull the camera to remove it.

Unplug and remove the front camera.

Disconnect the interconnection flex.

Unplug the display data flex.

Take off the flex with volume pushbuttons and ignition of the chassis.

Remove the Phillips screw that holds the motherboard.

Disconnect the data flex from the touch screen.

Lift the base plate and disconnect the coaxial antenna cable to remove it.

Disconnect the flex from the proximity sensor on the motherboard.

Finally, remove it from the metal shield.