With the tine tool, separate the back cover and remove it.

Remove the screws that hold the cover. With the spatula detach the fingerprint reader. Use the curved tip tool to detach the flex from the flash, and with the opening tool remove the lid.

With the opening tool release the connection of the battery and remove it.

With the clips release the flex of the buttons, and desolder it to remove it.

With the opening tool release all connections on the motherboard.

Remove the last screw that holds the base plate. Unsolder the headphone connection. With the opening tool release the base plate and remove it.

With the curved tip tool remove the handset.

Remove the screws that hold the cover. With the opening tool release the lid.

Unsolder the connection to remove the speaker next to the cover.

With the opening tool release the connection of the coaxial cable and the flex.

With the opening tool release the vibrator and desolder the connection. Remove the auxiliary plate.

With the opening tool remove the flex.

With the tongs remove the buttons from the housing.