We use an opening tool to disengage the back shell. We will make the outline until it is completely removed.
Step 2 Intermediate housing
Unscrew the Phillips screws (PH # 00) that hold the intermediate housing.
We unhook it.
We disconnect the flex from the fingerprint reader and remove the middle shell completely.
Step 3 Drums
We disconnect the flex from the battery and remove it.
Step 4 Components
We disconnect the flex from the screen and the digitizer.
Step 5 screen
We heat the screen with a thermal mat at 80 degrees for 2 minutes.
We introduce a metal pick between the screen and the frame. We change it by a plastic spike so as not to scratch the frame.
We do all the contour by taking off the adhesive that holds the screen.
Step 6 screen
We took off the screen flex, separated it and removed it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.