We lever with a plastic tool and we unlock the back cover to remove it completely.
Step 2 Drums
We remove the battery.
Step 3 Intermediate housing
Unscrew the Phillips screws (PH # 00) that hold the center housing and remove it by undoing it.
Step 4 Rear camera and side push button
Take off the rear camera with flash that is stuck to the motherboard. We desoldered it and withdrew it.
We take off the lateral button to facilitate the desoldarlo of the base plate.
Step 5 Frontal camera
We disconnect and remove the front camera.
Step 6 Components
We disconnected the interconnection flex and the flex of the screen. We disconnect the coaxial cable.
Step 7 Motherboard
Unscrew the Phillips screws (PH # 00) that hold the motherboard and remove it.
Step 8 Rear camera
We disconnect and remove the rear camera.
Step 9 Handset
We take off the receiver, we desoldamos it and we retire it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.