First we must unhook the back cover, for this we will use a flat tool.

Remove the eleven Phillips screws (PH # 00) that we indicated in the first picture, take off the fingerprint reader, and underneath we will find another screw just like the previous ones, and using a flat tool we will unhook the intermediate housing.

We disconnect the battery to work with greater security.

Remove the five Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will unhook it.

We remove the shield that protects the battery.

We take off the battery using the stickers available to the battery.

We disconnect all the components that are connected on the motherboard.

We remove the three Phillips screws (PH # 00) that hold the motherboard, and with the help of a flat tool we will remove it.

We take off and unhook the interconnection flex and the coaxial cable.

To finish we will take off the vibrator, remove the Phillips screw (PH # 00) that holds the auxiliary plate, and with the help of a flat-tip tool we will detach the auxiliary plate from the screen that we have to replace.