We remove the SIM tray from the mobile.

Remove the Torx screws (T4) that are on each side and remove the metal sheets.

We apply heat to the screen, for 2 minutes at 80 degrees.

We introduce a metal pick between the screen and the mobile. We exchanged it for a plastic spike so as not to scratch the screen or the frame. We do all the contour taking off the screen.

We remove the Phillips screw (PH # 00) that holds the metal sheet that covers the flex of the screen. We disconnected the screen and removed it.

Unscrew the Torx screws (T4) and the Phillips screws (PH # 00) that hold the center housing and remove it by prying it off.

We took off the receiver and removed it.