To begin we must apply heat to the screen, and with the help of a suction cup we will open enough space to introduce a plastic spike and take off all the adhesive that is around the edges of the screen.

We extract the Phillips screw (PH # 00) that holds the shield that covers the connector of the screen, and once the shield is removed we can disconnect the screen.

We extract the fourteen Phillips screws (PH # 00) that hold the housing and the shield of the battery connector, disconnect the battery and with the help of a flat tool we will disengage the housing.

Remove the Phillips screw (PH # 00) that holds the auxiliary plate.

Desoldamos the loudspeaker, and using a flat tool we will lift the auxiliary plate to be able to disconnect the coaxial cable and the interconnection flex.