With an opening tool we remove the back cover.

We remove the battery.

Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and remove it.

We disconnected the cameras and removed it.

We disconnect the flex from the screen, the flex from the digitizer, the flex from the side pushbutton.

Unplug the motherboard.

We desoldamos the speaker of the motherboard.

Unseal the base plate and desoldamos the vibrator to remove it.

We apply heat at 80 degrees for 2 minutes to the screen.

We introduce a metal barb between the screen and the intermediate casing. We exchanged the metal spike for a plastic spike so as not to scratch the frame. We will do all the contour separating the screen of the intermediate casing until it can be completely removed.