We apply heat to the back casing, and with the help of a fine tool we will just raise the casing to introduce one or more plastic tines, and thus we will not scratch the casing.
Step 2 Fingerprint Flex
Disconnect the flex interconnect fingerprint reader.
Step 3 Intermediate housing
We extract the fifteen Phillips screws (PH # 000) that hold the intermediate housing, and with the help of a flat tool we will disengage it.
Step 4 Rear camera
We remove the Phillips screw (PH # 000) and the shields around the rear camera, and we can disconnect it.
Step 5 Frontal camera
We disconnect and remove the front camera.
Step 6 Components
We disconnect all the components that are connected to the motherboard.
Step 7 Motherboard
We extract the three Phillips screws (PH # 000) that hold the motherboard, remove the tray from the cards, and with the help of a flat tool we lift the base plate.
Step 8 Side push buttons
We extract the four Phillips screws (PH # 000), and using a flat tool we will detach and unhook the side buttons.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.