We apply heat to the back casing, and with the help of a fine tool we will just raise the casing to introduce one or more plastic tines, and thus we will not scratch the casing.

Disconnect the flex interconnect fingerprint reader.

We extract the fifteen Phillips screws (PH # 000) that hold the intermediate housing, and with the help of a flat tool we will disengage it.

We remove the Phillips screw (PH # 000) and the shields around the rear camera, and we can disconnect it.

We disconnect and remove the front camera.

We disconnect all the components that are connected to the motherboard.

We extract the three Phillips screws (PH # 000) that hold the motherboard, remove the tray from the cards, and with the help of a flat tool we lift the base plate.

We remove the Phillips screw (PH # 000) that holds the speaker to the chassis of the phone, and with the help of a flat tool we will take off the speaker that we are going to replace.