Sony Xperia T3 (Style) - Vibrator

Guide with all the necessary steps so that you can change the vibrator of the Sony Xperia T3 (Style) yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Sony Xperia T3 (Style)

Specifications :
OS: Android 4.4.2 KitKat
Screen: 5.3-inch IPS LCD with Triluminos display and Mobile BRAVIA Engine 2
Resolution HD 720 x 1280 pixels (277 ppi)
SoC: Qualcomm Snapdragon 400 MSM8928
CPU: 4 ARM Cortex-A7 cores at 1.4 GHz
GPU: Adreno 305
RAM: 1 GB
Storage: 8 GB internal expandable via microSD cards up to 32 GB
Chambers: Rear 8 megapixels with LED flash, and front 1.1 megapixels
Networks: 2G GPRS, EDGE; 3G HSUPA, HSDPA; 4G LTE Cat.4
Connectivity: GPS with A-GPS and GLONASS, Wi-Fi, Wi-Fi Direct, DLNA, Bluetooth 4.0, NFC, Micro-USB 2.0, FM Radio, 3.5 mm jack
Battery: 2500 mAh
Dimensions: 150 x 77 x 7 mm
Weight: 150 grams

Before starting make sure that the mobile is off.

Step 2 Opening

Remove the microSD and SIM cards

We will take advantage of the opening to start disassembling the back cover.

Step 3

Use the special metal spatula for mobile phones.

Release the plastic tabs located around the contour of the phone.

Step 4

Do not damage or bend the 2 metal contacts located at the bottom and top respectively.

Step 5 Lower module (antenna and speaker)

Remove the 6 Torx screws indicated in the image.

Separate the lower antenna and speaker module.

Step 6 Vibrator

Disconnect the vibrator from the motherboard.

Step 7

Finally, take off the vibrator with the metal spatula.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial