Before you start, make sure your mobile is turned off.

Remove the back cover with the help of the tine, unhooking the plastic tabs located around the contour.

Remove the SIM and SD cards.

Remove the four rubber caps with "Smileys" drawn: D, located in the 4 corners of the phone.

Remove the 6 Torx screws.

Remove the intermediate housing, releasing the plastic hooks with the tine.

Unplug the battery from the motherboard.

Unplug the upper end of the coaxial cable.

Unplug the display data flex, just below the battery connector.

Separate the base plate, prying gently with the opening tool.

Finally, disconnect and remove the rear camera.