To begin we must apply heat to the screen of the phone, since this terminal is opened by the front.

When the adhesive is hot, we will introduce one or more fine tools of which we will help to separate the adhesive. Once we take off the screen we will have to remove the two Phillips screws (PH # 00) that hold the shields that we pointed out in the third picture. Then we will disconnect the battery, to avoid possible damages, and the screen.

Remove the five Phillips screws (PH # 00) and the other five Torx screws (T5), and with the help of a fine tool we will unhook all the edges of the intermediate casing.

We remove the tray from the cards, disconnect the front camera, and the other components that are connected to the motherboard, and with the help of a flat tool unhook the plate.

We disconnect the two connectors from the cameras and remove them from the motherboard that we are going to change.