We start by heating the lid to soften the adhesive and make it easier to peel it off. We heat it to about 65 ° C for about a minute.

With the hot back cover, we slide a flat tool around the contour between it and the frame. Once detached, we will disconnect the fingerprint reader to separate it.

We take out the eight Phillips screws (PH # 00) that hold the upper internal shell, undo it and take off the sides of the NFC antenna.

Remove the seven screws that hold the loudspeaker module and the intermediate internal casing and disengage them.

We disconnected the antenna cables, the flex of the screen and the battery, the front cameras and the flex of the proximity and flash sensor.

We remove the Phillips screw (PH # 00) that holds the motherboard and also remove the SIM / SD tray. Now we lift the base plate by the lower part to disconnect it from the auxiliary plate and disengage it.

All that remains is to take off and disengage the vibrator from the chassis.