We apply heat to the back shell to soften the glue, and to be able to remove it we will help with a suction cup and a tine, when lifting the case we will have to disconnect the connector from the fingerprint reader.

Remove the 15 Phillips screws (PH # 00) that hold the intermediate housing and speaker module so that both the housing and the module can be removed.

We extract the tray with the extraction tool.

We disconnect the flex from the battery, and remove the front camera.

We remove the coaxial cable and the other flex cables that remain connected in the base plate to be able to remove it.

Take off and remove the auxiliary plate.

We remove the headset, the vibrator, the light and proximity sensor and the battery.

We extract the shielding of the key with the help of flat clamps, and with the help of more pointed claws, we remove the key.

Finally we will remove the shielding of the volume keys and the Bixby key and the keys.