We start by heating the back cover to soften the adhesive. We will heat it to about 60ºC for about a minute.
With the hot lid, we slide a pick or other flat opening tool between it and the frame.
Step 2 Intermediate housing
Remove the eleven Phillips screws (PH # 00) that hold the casing and disengage it.
Step 3 Remove speaker module
We remove the three Phillips screws (PH # 00) that hold the module and unhook it.
Step 4 Disconnect components
We disconnect the components of the motherboard.
Step 5 Removing the motherboard
Remove the SIM / SD tray and undo the motherboard.
Step 6 Motherboard
It only remains to disconnect the rear camera from the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.