We will start by removing the back cover that is attached to the intermediate housing. For this we will apply some heat to soften the glue.

Using a suction cup we can separate the lid a little to introduce the tool more easily. Sliding the spike around the contour we will take off the lid.

To remove the intermediate housing we will have to remove the thirteen Phillips screws (PH # 0) and the tray of the SIM card.

After removing the screws and the tray, removing the casing will be simple. Using an opening tool, we will release the hooks that attach it to the chassis.

Finally, we only have to take off the NFC antenna from the intermediate housing.