To begin, we must apply heat to the back cover in order to soften the adhesive that holds it, and with the help of one or more plastic spikes we will take off all the edges of the case.

We disconnect the wireless charging coil, the NFC antenna, and we will remove the five Phillips screws (PH # 00) that hold the shield, and we can unhook the shield and take off the wireless charging coil.

We disconnect the battery to work with greater safety.

We extract the four Phillips screws (PH # 00) that hold the module, and with the help of a flat tool we will remove the speaker module.

We disconnect the two interconnection flexes, and with the help of an extraction tool we will remove the card tray.

We remove the three Phillips screws (PH # 00) that hold the auxiliary plate that we have to replace, and with the help of a flat-tipped tool we will unhook it.