To begin, we must apply heat to the back cover in order to soften the adhesive that holds it, and with the help of one or more plastic spikes we will take off all the edges of the case.

We disconnect the wireless charging coil, the NFC antenna, and we will remove the five Phillips screws (PH # 00) that hold the shield, and we can unhook the shield and take off the wireless charging coil.

We disconnect the battery to work with greater safety.

We disconnected and took off the flex with the rear flash and autofocus.

We remove the four Phillips screws (PH # 00) that hold the headphone module, disconnect it, and we can place the new one in its place.