To begin, we must apply heat to the back cover in order to soften the adhesive that holds it, and with the help of one or more plastic spikes we will take off all the edges of the case.
Step 2 Shield with NFC antenna and wireless charging coil
We disconnect the wireless charging coil, the NFC antenna, and we will remove the five Phillips screws (PH # 00) that hold the shield, and we can unhook the shield and take off the wireless charging coil.
Step 3 We disconnect the battery
We disconnect the battery to work with greater safety.
Step 4 Back flash and autofocus
We disconnected and took off the flex with the rear flash and autofocus.
Step 5 Headphone module
We remove the four Phillips screws (PH # 00) that hold the headphone module, disconnect it and remove it.
Step 6 Frontal camera
We disconnected the front camera that we are going to replace, and since it is stuck with a little adhesive we have applied a little heat with a hot air gun to soften it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.