First of all we must apply heat to the back shell to soften the adhesive that holds it, and with the help of a plastic pick we will peel off all the edges of the shell.
Step 2 We disconnect battery
We remove the five Phillips screws (PH # 00) that hold the intermediate shield to which the wireless charging coil is attached, and with a flat tool we will unhook it, and we can now disconnect the battery, in order to work with greater security.
Step 3 Upper intermediate housing
We remove the four Phillips screws (PH # 00) that hold the housing, and with a flat tip tool we will unhook it.
Step 4 Components
We disconnect all the components that are connected to the motherboard and remove the card tray.
Step 5 Motherboard with rear cameras
We remove the two Phillips screws (PH # 00) that hold the motherboard and the rear cameras, and with a tool we will make a smooth lever to lift the motherboard.
Step 6 Side push buttons
Finally, with the help of a flat tool, we will unhook the damaged side buttons.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.