Before we start, we will remove the stylus.

Using a plastic opening tool, we will disengage the housing from the notches that hold it.

We must not forget to remove the SIM and SD cards before continuing dismantling.

With the opening tool we will lever the bottom of the battery to disengage it and thus be able to remove it.

To remove the intermediate housing, first we will have to remove the 15 Phillips screws (PH # 0) that hold it. After removing the screws, with the help of a pick or other opening tool, we will unhook the housing from the notches that hold it.

To get to the handset, we will have to remove the motherboard beforehand. For this we will disconnect the components that, in turn, make it subject to this.

In this step we will disconnect the flexes from the screen and the front camera.

We continue disconnecting the components of the motherboard. Now we disconnect the antenna coaxial cables and the flex of the start button. To remove the plate, with the help of an opening tool, we will leverage the part shown in the images to disconnect it from the lower plate.

Finally, we will detach the flex from the chassis pushbuttons and disengage it to remove it.