Remove the battery cover. We recommend the use of an opening tool to avoid damaging the housing.

Remove the battery by pulling the top first.

The housing is supported by 7 Phillips screws.

Remove the lid and the plastic holder from the mUSB connector

Insert an opening tool into the joint between the screen and the housing. Gently move the lever all the way around until it is loose.

Disconnect the data cables from the motherboard.

Release the microphone from the bottom.

Peel off the side buttons. Use a plastic tool to avoid damaging the casing.

Hold the motherboard and open the phone as if it were a book.

Release the central connector that holds the plate together with the housing.

To remove the button from the home button, simply press with your fingers.