To start, we extract the card reader with the help of a SIM removal tool.
Step 2 Back case
We apply heat to the back cover to soften the adhesive that holds it (approx 5min at 75º C), we introduce a fine opening tool and we open enough hole to insert a plastic spike and with it we will take off all the edges of the housing without damaging it .
Step 3 Rear camera lens
We remove the five Phillips screws (PH # 00) that hold the lens of the rear cameras, then with a fine tool we unhook it and remove it.
Step 4 Intermediate housing
We remove the thirteen Phillips screws (PH # 00) that hold the intermediate casing and with a fine tool we unhook all the edges and extract it.
Step 5 Disconnect fingerprint reader
We disconnect the fingerprint reader.
Step 6 Power button
Finally, with the help of a metal pick, we unhook the button from the power button, then disconnect it and extract it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.