To start, we extract the card reader with the help of a SIM removal tool.
Step 2 Back case
We apply heat to the back cover to soften the adhesive that holds it (approx 5min at 75º C), we introduce a fine opening tool and we open enough hole to insert a plastic spike and with it we will take off all the edges of the housing without damaging it .
Step 3 Rear camera lens
We remove the five Phillips screws (PH # 00) that hold the lens of the rear cameras, then with a fine tool we unhook it and remove it.
Step 4 Intermediate housing
We remove the thirteen Phillips screws (PH # 00) that hold the intermediate casing and with a fine tool we unhook all the edges and extract it.
Step 5 Disconnect fingerprint reader
We disconnect the fingerprint reader.
Step 6 Disconnect battery
We will disconnect the battery to work more safely.
Step 7 Rear cameras
Finally, we will disconnect the four rear cameras and extract them.
The first camera is the ultra wide angle lens.
The second camera is the main 64MP camera.
The third camera is the telephoto lens.
The fourth camera is the 4cm macro lens.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.