We will start by removing the back cover, for this we will use a plastic opening tool to separate it from the phone.

After removing the back cover we will have access to the battery. Removing it will be very easy using the plastic opening tool.

Before removing the intermediate housing we will have to remove the SIM and microSD cards. Using a clamp or fingers, we will pull the cards to extract them.

To remove the intermediate casing, first we will have to remove the ten Phillips screws (PH # 00) that attach this to the chassis. Then we introduce a spike between the frame and the casing to release the notches to which it is still attached.

In order to remove the lower plate, first we will have to disconnect the components and remove the Phillips clamping screw (PH # 00). We will disconnect the antenna cable and the interconnection flex.

Finally, we will take off the bottom plate with care and then desoldaremos the vibrator of this.