Guide with all the necessary steps so that you can change the components of the Oppo Find X2 Neo (CPH2009) yourself.
To begin with, we must apply heat to the back cover to soften the adhesive that holds it, we can apply heat several times since the adhesive is quite strong. With a fine tool we will open a small hole through which we will introduce one or more plastic spikes, so as not to damage the paint of the casing, and we will take off the entire edge.
We lift the auxiliary plate and disconnect the two coaxial cables that are connected to the back of the plate.
To change the battery it would not be necessary to remove the auxiliary plate, it would be enough to remove the interconnection flexes, or simply disconnect them from the base plate, although we recommend removing them completely for greater comfort.
We take off the adhesive from the side of the battery, and we will introduce a few drops of isopropyl alcohol between the adhesive and the battery, we tilt the phone a little so that the alcohol slides under the battery, and by pulling the green adhesive we will take off the battery that we have what to replace