To begin, we will apply heat to the rear case with a hot air gun, and using one or more plastic spikes we will take off all the edges of the case.

We remove the eleven Phillips screws (PH # 00) that hold the housing, and with the help of a flat tip tool we will unhook it.

To work with greater security we will disconnect the battery.

We disconnect all the components that are connected on the motherboard.

We remove the two Phillips screws (PH # 00) that hold the motherboard, and with a flat tip tool we will remove it.

We unhook the shield that covers the connectors of the cameras, and we will disconnect the rear cameras from the broken motherboard that we have to replace.