To begin, we will apply heat to the back cover with a hot air gun, and using one or more plastic spikes we will take off all the edges of the case.

We remove the eleven Phillips screws (PH # 00) that hold the housing, and with the help of a flat tip tool we will unhook it.

To work with greater security we will disconnect the battery.

We remove the tray from the cards.

We remove the seven Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will unhook it.

We disconnect all the components that are connected in the auxiliary plate, and with the help of a flat tool we will remove the plate.

We will disconnect the flex with the load connector of the motherboard, and using a flat tool we will unhook the connector.

To finish we will take off the damaged fingerprint reader that we need to replace.