To remove the back cover we will pry it off with a flat tool.

We will do the same to remove the battery.

We remove the ten Phillips screws (PH # 00) that hold the housing to the chassis and disengage it by prying it off with a flat tool.

We disconnect all the components from the motherboard and extract it with a flat plastic tool.

We manually remove the front camera, extract the ear speaker by taking it off with a flat tool and remove the side buttons by taking them off with a fine tool.

We take off the flex from the touch screen.

We apply heat for a few minutes and introduce a fine tool to help us separate the screen from the chassis a little, then with the help of some tines we take it off.

Be careful with the flex of the touch screen when separating the screen from the chassis of the LCD display.

Now with the help of a fine tool we lift the LCD display taking special care to hook it to the silver and remove it.