To begin, we must apply heat to the back cover, and with the help of a thin tool we will open enough space to introduce a plastic spike, with which we will take off all the edges of the case.

We remove the eight Phillips screws (PH # 00), take off the light sensor and the flash and we can unhook the intermediate housing.

We disconnect the battery to work with greater security.

Remove the five Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will unhook it.

We remove the tray.

We disconnect the components that are connected to the motherboard.

We disconnect the front camera and the coaxial cable, remove the five Phillips screws (PH # 00) that holds the motherboard, and with the help of a flat tool we remove it.

Remove the Phillips screw (PH # 00) that holds the auxiliary plate, disconnect the coaxial cable, and with the help of a flat tool we detach the auxiliary plate.

We unhook the coaxial cable and take off the battery.

Finally we take off the headset and the vibrator from the full screen that we have to replace.