To begin, we must apply heat to the back cover, and with the help of a thin tool we will open enough space to introduce a plastic spike, with which we will take off all the edges of the case.

We remove the eight Phillips screws (PH # 00), take off the light sensor and the flash and we can unhook the intermediate housing.

We disconnect the battery to work with greater security.

Remove the five Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will unhook it.

To take off the damaged battery we can moisten the adhesive of the battery with a few drops of alcohol, and we can introduce a tool thin enough and carefully take off the battery.