Insert the SIM extraction tool into the opening hole located in the upper part of the rear housing, and facilitate the entry of the tine. With the prong go separating the back cover.

Remove the torx screws that hold the intermediate housing. Remove the rubber stops that protect the connections, and release them with the opening tool. With the clamps, remove the button clamping plate and remove the buttons. With the opening tool release the flash connection and remove the intermediate housing.

With the opening tool release the connections of the cameras and extract them.

With the opening tool, pinch the connections of the motherboard.

Remove the Torx screw that holds the plate and remove it with the opening tool. With the curved tip tool remove the earphone and speaker.