We apply heat on the back of the mobile. We will heat for 2 minutes at 80 degrees.
We will introduce a metal prong between the back cover and the mobile. We will exchange it for a plastic spike to avoid scratching it. We will do all the contour taking off the back cover.
Step 3 Fingerprint reader
Unscrew the two Phillips screws (PH # 00) that hold the metal sheet that protects the flex of the fingerprint reader. We will remove it and disconnect the flex from the fingerprint reader.
Step 4 Intermediate housing
Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and remove it.
Step 5 Components
We disconnect and remove the rear camera. We disconnected the interconnection flex, the flex of the battery, the flex of the screen, the coaxial cable and the flex of the lateral button.
Step 6 Motherboard
Unscrew the Phillips screws (PH # 00) that hold the motherboard and remove it.
Step 7 Frontal camera
We disconnect and remove the front camera.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.