We apply heat on the back of the mobile. We will heat for 2 minutes at 80 degrees.
We will introduce a metal prong between the back cover and the mobile. We will exchange it for a plastic spike to avoid scratching it. We will do all the contour taking off the back cover.
Step 3 Fingerprint reader
Unscrew the two Phillips screws (PH # 00) that hold the metal sheet that protects the flex of the fingerprint reader. We will remove it and disconnect the flex from the fingerprint reader.
Step 4 Intermediate housing
Unscrew the Phillips screws (PH # 00) that hold the intermediate housing and remove it.
Step 5 Lower housing
Unscrew the Phillips screws (PH # 00) that hold the lower case, disconnect the interconnection flex and disengage the lower case.
Step 6 Auxiliary plate
Unscrew the Phillips screws (PH # 00) that hold the auxiliary plate to the lower housing. Disconnect the coaxial cable and remove the auxiliary plate.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.