First of all we will have to remove the tray from the cards.

We apply heat and take off the screen by the areas seen in the photographs, since on the right side of the phone there are the flexes of the screen and the fingerprint reader. Once the three edges that we indicated in the photographs are taken off, we can take off taking care not to damage the flex, the glue that is on the right edge.

We extract the 20 Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a metal spike we unhook it.

We disconnect the flex from the screen and the fingerprint reader, and we can remove the screen

We disconnect and remove the rear camera.

Disconnect all components that are connected to the motherboard and remove the Phillips screw (PH # 00) that holds the plate, and we can remove it.

We take off the battery.

We take off the flex that we are going to replace.