We start by removing the back cover. To do this, we introduce an opening tool between it and the frame and slide it around the outline until it is dislodged.
Step 2 Remove upper intermediate housing
Now we will remove the intermediate cases. We start by removing the seven Phillips screws (PH # 00) that hold the inner casing that covers the base plate and then unhook it.
Step 3 Remove casings
Now we remove the seven Phillips screws (PH # 00) that hold the speaker module to disengage it.
We will also remove the shield that covers the battery. For this we simply have to remove the four Phillips screws (PH # 00) that still hold it.
Step 4 Disconnect components
In this step, we disconnect the components of the motherboard and disengage the vibrator.
Step 5 Removing the motherboard
Remove the two Phillips screws (PH # 00) that still hold the base plate and undo it.
Step 6 Handset
Now all that remains is to disengage the headset from the chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.