Before starting make sure that the equipment is turned off.

With an opening tool release the hooks of the cover all around the contour.

The bottom of the lid has a line of glue.

Remove it with a pick.

Separate the back cover.

Release the hooks on the intermediate housing and remove it.

Disconnect and unfold the interconnection flex.

Disconnect the battery cable.

The battery is attached to the chassis.

Remove it by prying it with the opening tool.

Do not deform the battery as it may damage it.

Disconnect the upper ends of the coaxial cables.

Disconnect the rear and front cameras from the motherboard.

Use the opening tool to separate the motherboard.

Remove the plastic holder and the adhesive that covers the camera.

Remove the front camera by pulling it gently.