We start by removing the back cover. To do this, heat the back to about 60 ° C for about a minute.With the help of a suction cup we will make a hole to introduce an opening tool and sliding it around the contour will remove it.

To remove the speaker module, remove the four Phillips screws (PH # 00) that hold it. Then we will leverage to dislodge it.

Remove the seven Phillips screws (PH # 00) that hold the housing and pry it off.

To remove the motherboard, remove the front camera, disconnect the flex from the display and the load connector and remove the SIM / SD tray. Now we can undo the base plate of the chassis.

All that remains is to take off the chassis vibrator.