Unhook the case, and disconnect the flex from the fingerprint reader.
Step 4 Components
Remove the 6 Phillips screws (PH # 00) that hold the cover and the depth chamber, and disconnect everything that is connected to the motherboard.
Step 5 Components
We remove the back camera and the depth camera, and disconnect the flex with side buttons.
Step 6 Components
We disconnected the flex from the screen and from the sensors and microphone.
Step 7 Motherboard
Remove the 7 Phillips screws (PH # 00) and we can remove the base plate.
Step 8 Handset
Finally, with the help of a pick we take off the handset that we are going to change.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.