We start by removing the back cover. To do this we introduce a tool between it and the frame and slide it around the contour to unhook it. We can also do it directly with our hands.

Disengage the battery by prying it with a tool or with your hands.

We remove the seven Phillips screws (PH # 00) that hold the intermediate housing and unhook it by prying it with an opening tool.

In this step we disconnect the flex from the side buttons, the flex from the digitizer and the coaxial cable. Then we remove the two Phillips screws (PH # 00) that hold the plate.

Now we will lift the plate at the top to disconnect the interconnection flex and the flex from the LCD display and thus be able to remove it.

To finish, we desoldamos the vibrator and disconnect the cameras from the motherboard.