Innjoo Two - Handset

Guide with all the necessary steps so that you can change the handset of Innjoo Two yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Specifications

Dimensions: 69.4 x 143.5 x 7.99 mm

Weight: 134 g

SoC: MediaTek MT6753

Processor: ARM Cortex-A53, 1300 MHz Number of cores: 8

Graphic processor: ARM Mati-T720 MP3, 450 MHz Number of cores: 3

RAM memory: 2 GB, 800 MHz

Internal memory: 16 GB

Memory cards: microSD, microSDHC, microSDXC

Display: 5 in, IPS, 720 x 1280 pixels, 24 bit

Battery: 3200 mAh, Li-Polymer (polymer lithium ion)

OS: Android 5.1 Lollipop

Camera: 4128 x 3096 pixels, 1920 x 1080! Teles, 30 fps

SIM card: Micro-SIM, Micro-SIM / microSD

Wifi: b, g, n, Wi-Fi Hotspot

USB: 2.0, Micro USB

Bluetooth: 4.0

Location / Navigation: GPS, A-GPS

Step 2 Cards

We remove the tray from the cards.

Step 3 Battery cover

Using a plastic spike we remove the battery cover.

Step 4 Intermediate housing

We remove the 16 Phillips screws (PH # 00), and with a plastic opening tool we extract the intermediate casing.

Step 5 Fingerprint detector

We disconnected the fingerprint detector.

Step 6 Battery

We disconnected the battery and took it off.

Step 7 Components

Disconnect the components and then remove the base plate.

Step 8

Step 9 Motherboard

Remove the Phillips screw (PH # 00) that holds the motherboard, lift the base plate, and disconnect the coaxial cable.

Step 10 Handset

To remove the handset that we are going to replace, we use a metal opening tool with a curved tip.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial