We extract the tray of the cards.

We lift the casing on one side, insert a card to help us lift it and remove it.

We disconnect the coaxial cable from both ends, disconnect the battery and remove it.

We remove the Phillips screw (PH # 00) that holds the upper case, and underneath it there is another case fastened with another 2 Phillips screws (PH # 00).

We disconnect and take off the back camera and the fingerprint reader.

We disconnect all the components that bother us to remove the motherboard.

It is not necessary to desolder the headset, taking it off would be enough.

Once disconnected and detached all the components we can remove the base plate.

Finally we will remove the front camera.