Before you start, make sure the phone is off.

To remove the back cover, use an opening tool to avoid damaging or scratching the case.

Remove the battery by pulling it from the bottom.

Remove the seven Phillips screws to open the housing.

Separate the housing with an opening tool to avoid scratching or damaging it.

Disconnect the flex from the front camera and gently pull out the component.

Disconnect the coaxial cable from the motherboard.

Disconnect the flex from the touch screen of the motherboard.

Unfasten the side buttons of the housing.

Disconnect the flex from the LCD display of the motherboard.

For convenience, remove the adhesive that covers the interconnection flex.

Use an opening tool to pry carefully and remove the base plate from the housing.

To remove the headset, carefully remove it from the case.