Remove the battery cover using a plastic tool to avoid scratching or damaging the case.

Remove the battery by pulling on the bottom.

Remove the SIM and micro SD cards.

Remove the 8 Phillips screws to open the housing.

Separate the intermediate housing with an opening tool to avoid scratching or damaging the equipment.

Remove the 2 Phillips screws that hold the motherboard.

Disconnect the data cables from the board.

To remove the camera, you must press the connector clip and gently pull the component.

Disconnect the coaxial cable from both ends.

Separate the coaxial cable by gently pulling it.

Disconnect the flex cable from the front camera, for this actuate the clip and pull it gently.

Separate the plate from the housing.

To remove the handset, remove it from the housing.